Description

I Product Introduction 1. Product Overview GSM·MGPS MICRO COMPUTER CAR ALARM SYSTEM is a new version of two-way car alarm system It combines the GSM mobile communication, MGPS locating technology and MICROCHIP rolling code technology, multi-code mating and microcomputer technology The car owners can remote control the car by telephone in another place even in another city This system can call any telephone number automatically upon there is alarm in the car It can also arm, disarm, speak to the car, and cut off the electricity or petrolic circuit, remote start, and monitor If the car is lost or robbed, this system can locate the car 2. Name of the Product GSM·MGPS MICRO COMPUTER CAR ALARM SYSTEM (**8C) 3. Basic Components 1 mainframe, 2 remote controls, 1 dialer, 1 vibrator, 1 siren, 1 relay, 1 emergency help switch, 1 LED, 1 microphone, 1 bundle of output wire (*2 holes), 1 bundle of input wire (8 holes), 1 bundle of input wire (4 holes), 1 bundle of start connection wire, 1 operating instruction, 1 bundle of fastening wire 4. Buttons of the Remote Control LOCK/ UNLOCK/ Arm Disarm Mute Start 5. Technical Specification *1 Mainframe Working Voltage: *2V Static Current (+GSM Module): *0mA **0 mA Arm/Disarm Working Frequency: **5MHZ***6HMZ Cover Area and Capacity: identical to the GSM system Location Accuracy: *****0M (which depends on the GSM service) Alarming Time: Last until it is disarmed or the alarm telephone is answered *2 Voltage of the Output Control Point Ignition Control: 0V Alarm Control: *2V Petrol Control : 0V Siren Control : *2V *3 Input Checking Voltage Door: 0V Key: *2V Foot Brake: *2V *4 GSM Module Frequency Range: GSM **0MHZ/***0MHZ Voltage of Serial Interface: *8V Stand-by Current: ****5mA Control Distance: No limit in the network of GSM *5 Remote Control Working Voltage: *2V(1 A*7 *2V dry battery) Working Frequency: **5MHz***6HMz Control Distance: >*0M <**0M Static Current: 0mA *6 Working Conditions **1 Mainframe Storage Temp: *****5 Working Temp: *****5 Working Humidity: *5% *5% **2 Accessory Storage Temp: ******0 Working Temp: *****5 Working Humidity: *5% *5% *7 Size of the Mainframe **4MM***0MM**4MM II Original Settings 1. Insert a SIM Card Before using this system, please buy a SIM card of GSM Insert the card into the back of mainframe Please remember the card number 2. Set and Modify the Code Please change the original code of this system in order to prevent any wrong telephone call and illegal operation Operation Solution: Dial the SIM card number to enter into the Main Menu of Operation, then to Modify Code to set your own code 3. Forget the Code Solution: Make an alarm purposively by someone Answering the alarm telephone, the owner can change the code by following the voice instruction 4. Set Normal Alarm Telephone Number 2 normal alarm telephone numbers can be set into this system In case of any alarm, this system will call these 2 numbers by turns, which will never stop until one of these calls is answered Operation Solution: Dial the SIM card number to enter into the Main Menu of Operation, then to Alarm Phone Setting to set the alarm telephone 5 Set Emergency Help Number When the car enters into anti-hijacking status, the mainframe of this system will dial the emergency help number to get help As the driver may be restrained to take any action in this situation, owner had better set his intimates or family telephone into this emergency help number Operation Solution: Dial the SIM card number to enter into the Main Menu of Operation, then to Alarm Phone Setting to set it 6 Close or Open an Alarm Telephone Number The user can close or open one of the alarm phone numbers by entering Function Setting Menu 7 Delete an Alarm Telephone Number Press # when you are setting the alarm telephone number. The system will give a notice that there is no content Then press confirmation button to delete the number III Function and Operation 1. Alarm and Trigger Mode 1.1. Alarm Mode of LED In armed: LED flash 3 times, stop for 1 second Triggered by shock: LED flash 3 times, stop for 1 second Trigger from power-on: LED flash for 2 seconds, stop for 2 seconds Disarming after being triggered: LED flash for 3 seconds 1.2. Alarm Mode of Door/Ignition Start/Foot Brake Trigger 1.2.1. In the armed condition, there will be alarm if the door is opened, or the car is ignited, or someone steps on the foot brakes 1.2.2. Alarm mode: A The siren beeps B The turn light flashes for *5 seconds C System calls the alarm phone number